Search found 5722 matches

by danielj
Sun Apr 22, 2018 10:39 am
Forum: hardware
Topic: 10base-2 crossover?
Replies: 54
Views: 2305

Re: 10base-2 crossover?

@lccw1 - gotcha :) I found the right model of my ethernet card It is an Acorn_AEH72_AccessA3000 and Acorn_ConnectingAcornAccessNw.pdf How I can set ip address, subnet mask, default gateway on the Archimedes for corresponding with the Access+ server virtual machine ? @number-one - without the univers...
by danielj
Sun Apr 22, 2018 9:20 am
Forum: hardware
Topic: 10base-2 crossover?
Replies: 54
Views: 2305

Re: 10base-2 crossover?

I don't understand what you're asking now?
by danielj
Sun Apr 22, 2018 7:55 am
Forum: hardware
Topic: 10base-2 crossover?
Replies: 54
Views: 2305

Re: 10base-2 crossover?

(Also, have you done a power-on holding delete since you installed the podule? Just to reset the cmos? It might sort out that message you're getting).

d.
by danielj
Sun Apr 22, 2018 7:34 am
Forum: hardware
Topic: 10base-2 crossover?
Replies: 54
Views: 2305

Re: 10base-2 crossover?

I have 4MB on my A3010. That makes things much happier! :) See here Access+ at the end on network section Access+ User Guide There is a remote booting functionality (page 16) with my network card Access+ (ShareFS) built in firmware. My archimedes try to boot on lan (I see the floppy drive led blink...
by danielj
Sun Apr 22, 2018 6:35 am
Forum: hardware
Topic: 10base-2 crossover?
Replies: 54
Views: 2305

Re: 10base-2 crossover?

. The Net icon that you're seeing in the !Configure app is for Econet, rather than Ethernet. Unfortunately, once again, Econet is not easily installed in a A3010 (though it has been done at least once before) https://groups.google.com/forum/#!topic/comp.sys.acorn.hardware/RlRrSf5fxeE%5B101-125%5D ....
by danielj
Sat Apr 21, 2018 6:41 pm
Forum: upcoming and recent events & exhibitions
Topic: Wakefield RISC OS show 21st April 2018
Replies: 45
Views: 1770

Re: Wakefield RISC OS show 21st April 2018

I have no pics -I was too busy talking! It was great to see everyone, fun meeting, lots of 8-bitness, lots of lovely colours, lots of new old tech :)

d.
by danielj
Sat Apr 21, 2018 6:40 pm
Forum: upcoming and recent events & exhibitions
Topic: ABUG SOUTH 1 to 3 June 2018 (near Camberley)
Replies: 7
Views: 133

Re: ABUG SOUTH 1 to 3 June 2018 (near Camberley)

We had a magic smoke release today with caps that were done two years ago :?

d.
by danielj
Fri Apr 20, 2018 11:30 am
Forum: hardware
Topic: Where to start resurrecting a RiscPC 700
Replies: 10
Views: 317

Re: Where to start resurrecting a RiscPC 700

Don't worry about the mini vacuum :D just wash it all off with water when you wash the vinegar off. Don't forget to remove all things that can be removed first (ie simms, ROMs etc)
by danielj
Thu Apr 19, 2018 10:39 am
Forum: upcoming and recent events & exhibitions
Topic: Wakefield RISC OS show 21st April 2018
Replies: 45
Views: 1770

Re: Wakefield RISC OS show 21st April 2018

I'll have it going :D

d.
by danielj
Wed Apr 18, 2018 10:09 pm
Forum: for sale / freebies
Topic: BeebSCSI full size + internal VFS adaptor boards
Replies: 103
Views: 3454

Re: BeebSCSI full size + internal VFS adaptor boards

Just to say, all of these are built and tested - I'm just making up cables etc. I aim to get everything packaged this week, but I'm prioritising the ones being picked up at Wakefield, so they'll go out early next week all things being equal. If you haven't sent me your address, please do! Also, plea...
by danielj
Wed Apr 18, 2018 5:44 pm
Forum: hardware
Topic: Electron ADFS games for HcX & GoTek floppy emulators
Replies: 5
Views: 232

Re: Electron ADFS games for HcX & GoTek floppy emulators

If you're along to Wakefield this w/end I'll be demoing some... :)

d.
by danielj
Wed Apr 18, 2018 6:30 am
Forum: software: new games
Topic: Time for Zarch .... on the beeb?!
Replies: 9
Views: 380

Re: Time for Zarch .... on the beeb?!

tricky wrote:I think Gil had plans and maybe a demo for solid ground Zarch on the Speccy, but my memory seems to have missed a few refresh cycles!


Virus was released on the speccy!

https://www.youtube.com/watch?v=DY8rBCplNWY

d.
by danielj
Wed Apr 18, 2018 5:40 am
Forum: hardware
Topic: Where to start resurrecting a RiscPC 700
Replies: 10
Views: 317

Re: Where to start resurrecting a RiscPC 700

Yes. I've seen worse! Get the battery off. Snip it off :) then take everything you can off the board and treat the area that has been leaked on with distilled vinegar, agitating with an old toothbrush. Wash it all off really well with water, and give it a good rinse with distilled water if you're in...
by danielj
Mon Apr 16, 2018 4:14 pm
Forum: hardware
Topic: Open source firmware for Gotek floppy emulator released
Replies: 125
Views: 8176

Re: Open source firmware for Gotek floppy emulator released

In FF.CFG put the line

Code: Select all

host = acorn


and you should be OK?


If it still doesn't work, I'll raise a ticket to fix it - it'll just be down to it not detecting the right size for all varients of adf, it can be fixed quite quickly.

d.
by danielj
Mon Apr 16, 2018 12:58 pm
Forum: software: classic games
Topic: Is there a list of games that use co-pros?
Replies: 14
Views: 498

Re: Is there a list of games that use co-pros?

That's the only one AFAIK.

Some discussion here also: viewtopic.php?t=8325

d.

Edit: SNAP! :)
by danielj
Sun Apr 15, 2018 4:15 pm
Forum: hardware
Topic: BeebSID 2.4 design files.
Replies: 20
Views: 778

Re: BeebSID 2.4 design files.

Iirc that's roughly what they cost last time around minus the Sid.

d.
by danielj
Fri Apr 13, 2018 2:23 pm
Forum: software: other
Topic: ADVANCED FOLIO
Replies: 5
Views: 232

Re: ADVANCED FOLIO

Jon, bring it to Wakefield and we can kryoflux it - we'll be able to spot what Shenanigans they've got up to very very quickly...
:D

d.
by danielj
Fri Apr 13, 2018 1:59 pm
Forum: for sale / freebies
Topic: BeebSCSI full size + internal VFS adaptor boards
Replies: 103
Views: 3454

Re: BeebSCSI full size + internal VFS adaptor boards

What is the current availability of these VFS adaptor boards please? And do they work with the "mini" board? And all types of Acorn SCSI interface connector on the Master motherboard? Yes and yes to the latter question, but unfortunately they're all accounted for (for the former question)...
by danielj
Thu Apr 12, 2018 9:37 pm
Forum: hardware
Topic: Tv display top line problem
Replies: 12
Views: 360

Re: Tv display top line problem

That doesn't work on the electron unfortunately...

d.
by danielj
Thu Apr 12, 2018 6:31 pm
Forum: hardware
Topic: Tv display top line problem
Replies: 12
Views: 360

Re: Tv display top line problem

Back in the day people would get the tv engineer out to drop the display for the beebs and elks - the top line would almost always be off on a normal set. That's basically what you're dealing with here.

d.
by danielj
Thu Apr 12, 2018 4:53 pm
Forum: hardware
Topic: P.R.E.S. AP5 - Original and Re-Design
Replies: 279
Views: 20020

Re: P.R.E.S. AP5 - Original and Re-Design

Oooh Dave - you are rather good :D

d.
by danielj
Wed Apr 11, 2018 10:39 am
Forum: upcoming and recent events & exhibitions
Topic: Wakefield RISC OS show 21st April 2018
Replies: 45
Views: 1770

Re: Wakefield RISC OS show 21st April 2018

I'll be there bright and early on Saturday morning to set up :)

d.
by danielj
Wed Apr 11, 2018 9:43 am
Forum: hardware
Topic: Acorn Electron modern storage solutions question
Replies: 26
Views: 983

Re: Acorn Electron modern storage solutions question

That code doesn't transfer files from floppy images, it just transfers files. No reason why it couldn't be re-coded to use MODE 6 AFAIK. If you want to move things off a floppy disc image onto a hard drive image (and vice versa) you can use DFS/ADFS Explorer on the PC or, I believe, the new bit of s...
by danielj
Sun Apr 08, 2018 9:06 pm
Forum: hardware
Topic: HXC Floppy emulator on A3010
Replies: 13
Views: 1463

Re: HXC Floppy emulator on A3010

From experience with play testing flashfloppy, I'm minded to think it's because RISC OS relies on well timed index pulses to detect whether the drive has a disk in it. It's probably fine with reads as the memory stick will be working fairly fast, but with writes it slows down and the pulses don't tu...
by danielj
Sun Apr 08, 2018 1:24 pm
Forum: for sale / freebies
Topic: Something for sale on Ebay
Replies: 3
Views: 347

Re: Something for sale on Ebay

Hi - if you'd like to sell to forum members in the context of the forum then that's fine - but please see rules above. This forum isn't for advertising items that you have on ebay I'm afraid.

d.
by danielj
Sun Apr 08, 2018 12:07 pm
Forum: hardware
Topic: Open source firmware for Gotek floppy emulator released
Replies: 125
Views: 8176

Re: Open source firmware for Gotek floppy emulator released

That all makes sense now :) The actual HxC emulator firmware hasn't been updated since 2013 afaik (beta seems to be from 2016) - it doesn't do Acorn format files as native, they do have to be converted to HFE. A thread on the support website's your best bet, indeed.

d.
by danielj
Sat Apr 07, 2018 4:26 pm
Forum: hardware
Topic: Open source firmware for Gotek floppy emulator released
Replies: 125
Views: 8176

Re: Open source firmware for Gotek floppy emulator released

That won't effect being able to update the firmware. I'm still not sure if we're talking Gotek or HxC floppy emulator here though? But please move discussions of issues with HxC firmware into the other thread anyway. This thread's for the open source stuff, which is now working fine with all the 8bi...
by danielj
Sat Apr 07, 2018 2:50 pm
Forum: hardware
Topic: Open source firmware for Gotek floppy emulator released
Replies: 125
Views: 8176

Re: Open source firmware for Gotek floppy emulator released

Is this an actual HxC floppy emulator, or a Gotek with the HxC software?
by danielj
Sat Apr 07, 2018 2:19 pm
Forum: hardware
Topic: Open source firmware for Gotek floppy emulator released
Replies: 125
Views: 8176

Re: Open source firmware for Gotek floppy emulator released

I believe it will. If it doesn't you can always stick the HxC software back on. HxC should also support the acorn formats without needing to convert to HFE though.

d.