Running ISE 14.7 on Windows 10

discussion of games, software, hardware & emulators relating to the Acorn Atom
bprosman
Posts: 147
Joined: Sun Mar 29, 2015 10:27 pm

Running ISE 14.7 on Windows 10

Postby bprosman » Mon Sep 04, 2017 12:21 pm

As I am going to play with Roland's YARRB and Atom2015 (and some homebrew stuff) I was installing Xilinx 14.7 ISE on Windows 10 - 64 Bit.
Installing went smooth, unfortunately I only got the 32-Bit version to work.

Some Googling brought me to :
http://www.eevblog.com/forum/microcontr ... -8-64-bit/

Works like a charm, so now I have Xilinx AND Quartus working to play with the Altera EPM3064 as well.
Here I designed a memory mapper in schematic "language". Understood that preference goes to VHDL.

Memory_Mapper_Partially.JPG


Kind regards, Bram
Last edited by bprosman on Mon Sep 04, 2017 4:17 pm, edited 1 time in total.

User avatar
hoglet
Posts: 6473
Joined: Sat Oct 13, 2012 6:21 pm
Location: Bristol

Re: Runnin ISE 14.7 on Windows 10

Postby hoglet » Mon Sep 04, 2017 1:14 pm

Well done! Xilinx do seem to go out of their way to make life difficult for their customers.

bprosman
Posts: 147
Joined: Sun Mar 29, 2015 10:27 pm

Re: Running ISE 14.7 on Windows 10

Postby bprosman » Fri Sep 22, 2017 1:20 pm

To avoid hijacking Hoglets T65 topic I continue here.
As mentioned earlier, I am very new to programmable logic so apologies for the "Stupid questions" .

I got my Xilinx XC6SLX9 Mini Board from EEPIZZA.
When i connect it to USB I see its working. The leds nicely PWM 4 by 4.

When I start ISE 14.7, oad one of the example projects that came with the board , e.g. Barrel shifter and I hit : Re-run all I get the following error :

ERROR:Map:258 - A problem was encountered attempting to get the license for this
architecture.

I have acquired a : "Vivado design suite : HL Webpack 2015 and earlier license.
They show up as follows :

# ----- REMOVE LINES ABOVE HERE --------------------------
#
# This license is valid from Thu Sep 21 12:49:24 UTC 2017.
#
# This is license NODELOCKED to HOSTID=ANY;
# there is no need to run lmgrd for this license.
#
#
# This is a permanent license generated on Thu Sep 21 12:49:24 UTC 2017
INCREMENT SDK xilinxd 2018.09 permanent uncounted 69E25740F2B2 \
VENDOR_STRING=bprosman,SDK,software,permanent,_211029524_0_0_246 \
HOSTID=ANY ISSUER="Xilinx Inc" START=21-Sep-2017 TS_OK
#
# This is a permanent license generated on Thu Sep 21 12:49:24 UTC 2017
INCREMENT Analyzer xilinxd 2018.09 permanent uncounted 4E2BED41DD8A \
VENDOR_STRING=bprosman,Analyzer,software,permanent,_211029524_0_0_048 \
HOSTID=ANY ISSUER="Xilinx Inc" START=21-Sep-2017 TS_OK
#
# This is a permanent license generated on Thu Sep 21 12:49:24 UTC 2017
INCREMENT HLS xilinxd 2018.09 permanent uncounted EA5A0DF35692 \
VENDOR_STRING=bprosman,HLS,software,permanent,_211029524_0_0_725 \
HOSTID=ANY ISSUER="Xilinx Inc" START=21-Sep-2017 TS_OK
#
# This is a permanent license generated on Thu Sep 21 12:49:24 UTC 2017
INCREMENT V_WebPACK xilinxd 2018.09 permanent uncounted 82C998995A1D \
VENDOR_STRING=bprosman,V_WebPACK,software,permanent,_211029524_0_0_422 \
HOSTID=ANY ISSUER="Xilinx Inc" START=21-Sep-2017 TS_OK
#
# ----- REMOVE LINES BELOW HERE --------------------------

User avatar
hoglet
Posts: 6473
Joined: Sat Oct 13, 2012 6:21 pm
Location: Bristol

Re: Running ISE 14.7 on Windows 10

Postby hoglet » Fri Sep 22, 2017 2:27 pm

This looks like the wrong license to me (oh why do Xilinx make this so difficult????)

See these posts:
http://www.stardot.org.uk/forums/viewto ... 43#p176243

Dave

bprosman
Posts: 147
Joined: Sun Mar 29, 2015 10:27 pm

Re: Running ISE 14.7 on Windows 10

Postby bprosman » Fri Sep 22, 2017 2:52 pm

Thanks dave, that did the trick :D
Just programmed my first "Barrel shift" program and it works :D

Now the next step, your ICE-T


Return to “acorn atom”

Who is online

Users browsing this forum: No registered users and 3 guests